9
FP-20xx Quick Start Guide
©
National Instruments Corporation
Install Software on the Host PC
A. Install the software packages you plan
to use, such as LabVIEW, LabVIEW RT,
Measurement Studio, VI Logger, or
LabWindows
™
/CVI
™
, before you install the
FieldPoint software. The FieldPoint
software installation installs the LabVIEW
VIs and examples, and LabWindows/CVI
instrument driver only if it finds the
corresponding development software
installed.
B. Close all other applications.
C. Insert the National Instruments FieldPoint Software CD into the CD-ROM drive of
your computer.
D. Follow the onscreen instructions to complete the installation.
8
NOTE
If the setup does not launch automatically, select
Start»Run
from
Windows, enter
d:\setup,
where
d
is the letter of the CD-ROM drive, and
select
OK
.
Configure the FP-20
xx
Launch NI Measurement & Automation Explorer (MAX) to configure the FP-20
xx. For
information about configuring the FP-20
xx in software, refer to the Measurement &
Automation Explorer Help for FieldPoint (
Start»Programs»National Instruments»
FieldPoint»FieldPoint Help
).
9
322759d.qxd 4/4/2003 4:58 PM Page 9