11
FP-20xx Quick Start Guide
©
National Instruments Corporation
Physical Characteristics
Screw-terminal wiring . . . . . . . . . . . 16–26 AWG copper conductor wire with 7 mm
(0.28 in.) of insulation stripped from the end
Torque for screw terminals . . . . . . . 0.5–0.6 N
·
m (4.4–5.3 lb
·
in.)
Weight. . . . . . . . . . . . . . . . . . . . . . . . . 278 g (9.8 oz)
Environmental
FieldPoint modules are intended for indoor use only. For outdoor use, they must be
installed in a suitable sealed enclosure.
Operating temperature . . . . . . . . . . . –25 to 55 °C
Storage temperature . . . . . . . . . . . . . –55 to 85 °C
Humidity . . . . . . . . . . . . . . . . . . . . . . . 10 to 90% RH, noncondensing
Maximum altitude . . . . . . . . . . . . . . . 2,000 m
Pollution Degree . . . . . . . . . . . . . . . . 2
Safety
The FP-20
xx is designed to meet the requirements of the following standards for safety
and electrical equipment for measurement, control, and laboratory use:
•
EN 61010-1, IEC 61010-1
•
UL 3121-1, UL 61010C-1
•
CAN/CSA C22.2 No. 1010.1
NOTE
For UL and other safety certifications, refer to the product label or to
ni.com
.
322759d.qxd 4/4/2003 4:58 PM Page 11
