National Instruments FD-11613, Руководство пользователя

Страница: 1 / 10

CALIBRATION PROCEDURE
FD-11613/11614
8-Channel/16-Channel Temperature Input Device for FieldDAQ
This document contains information for calibrating the FD-11613 and FD-11614. For more
information about calibration, visit
ni.com/calibration .
Contents
Software Requirements............................................................................................................. 1
Documentation.......................................................................................................................... 2
Test Equipment..........................................................................................................................2
Test Conditions..........................................................................................................................2
Calibration Procedure............................................................................................................... 3
Initial Setup....................................................................................................................... 3
Verification........................................................................................................................4
Adjustment........................................................................................................................ 7
EEPROM Update..............................................................................................................8
Reverification....................................................................................................................9
Accuracy Under Calibration Conditions...................................................................................9
Where to Go for Support.........................................................................................................10
Software Requirements
Calibrating the FD-11613 or FD-11614 requires the installation of NI-DAQmx on the
calibration system. NI recommends using the latest NI-DAQmx driver. Earliest driver support
version for calibrating the FD-11613 or FD-11614 is listed in the following table.
Table 1. FD-11613/11614 Driver Support
Driver Earliest Version Support for Device Calibration
NI-DAQmx 18.1
You can download NI-DAQmx from ni.com/downloads . NI-DAQmx supports many
programming languages, including LabVIEW, LabWindows
™
/CVI
™
, C/C++, C#, and Visual
Basic .NET. When you install NI-DAQmx, you only need to install support for the application
software that you intend to use.