National Instruments cRIO-9081, Руководство пользователя

Страница: 7 / 40

Table 1. RS-232 Serial Port Pinout
Pinout Pin Signal
Pin 1
Pin 5
Pin 6
Pin 9
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI/WAKE
You can use the Ring Indicator (RI) on pin 9 to wake the controller from a low-power state.
You can drive RI with a logic level high to wake the cRIO-9081. Refer to the specifications on
ni.com/manuals for the RI wake voltage.
RS-485/422 Serial Port
The cRIO-9081 has an RS-485/422 serial port that is implemented with an RJ-50, 10-position
modular jack. The RJ-50 connector is isolated from the cRIO-9081. For more information
about the electrical isolation of the RS-485/422 port, refer to the specifications on
ni.com/
manuals .
The following table shows the pinout for the RS-485 serial port.
NI cRIO-9081 User Manual | © National Instruments | 7