©
National Instruments Corporation
17
cFP-20xx Quick Start Guide
8. Install Software on the Host PC
1. Install the software packages you plan to use, such as LabVIEW,
LabVIEW RT, Measurement Studio, VI Logger, or LabWindows
™
/CVI
™
,
before you install the FieldPoint software. The FieldPoint software
installation installs the LabVIEW VIs and examples and the
LabWindows/CVI instrument driver only if it finds the corresponding
development software installed.
2. Close all other applications.
3. Insert the National Instruments FieldPoint Software CD into the CD-ROM
drive on your computer.
4. Follow the onscreen instructions to complete the installation.
Note
If the setup does not launch automatically, select
Start»Run
from
Windows, enter
d:\setup
, where
d
is the letter of your CD-ROM drive,
and select
OK
.
9. Configure the cFP-20
xx
Launch Measurement & Automation Explorer (MAX) to configure the cFP-20
xx
.
For information about configuring the cFP-20
xx
in software, refer to the
Measurement & Automation Explorer Help for FieldPoint
(
Start»Programs»
National Instruments»FieldPoint»FieldPoint Help
).
