National Instruments CA-1000, Руководство по установке

Страница: 7 / 21

CA-1000 6 ni.com
Internal Accessory
You can easily install many National Instruments DAQ accessories in
the CA-1000 enclosure.
Refer to Figure 3 and use the following steps to install the SC-2040,
SC-2042-RTD, SC-2043-SG, SC-2070, SC-2071, or SC-2072 into the
CA-1000 enclosure:
1. Remove the standoffs originally supplied on the SC-204 x or SC-207 x
internal accessory.
2. Position the SC-204 x or SC-207 x internal accessory on the
pre-installed standoffs of the CA-1000.
3. Install and tighten the four 4-40 panhead screws included with your
SC-204
x or SC-207 x internal accessory.
Note You can also mount the accessory rotated 180 ° from the position shown in Figure 3.
Figure 3. Installing the SC-204 x or SC-207 x
1 Pre-installed Standoffs 2 SC-204
x or
SC-207
x
3 4-40 Screws
1
2
3