National Instruments CA-1000, Руководство по установке

Страница: 18 / 21

© National Instruments Corporation 17 CA-1000
External Cables
You can connect a variety of standard National Instruments cable
assemblies to the CA-1000 enclosure. The type of cable you attach depends
on your application, your internal accessory, and your cable adapters.
You can choose from five locations for external cable connection on the
CA-1000. One of these locations will align with the PCMCIA slots on most
laptop computers. Refer to Figure 12 and use the following steps to install
your external cable assembly:
1. Attach one end of the external cable to the enclosure.
2. Attach the other end of the external cable to your DAQ device.
Figure 12. Installing External Cable Assemblies
1 Cable Connection Locations 2 External Cable
To DAQ
Device
1
1
1
1
2