manualshive.com logo in svg

National Instruments ATCA-3671, Руководство по началу работы, Страница: 5 / 26

Поделиться
Скачать
National Instruments ATCA-3671 Скачать руководство пользователя страница 5

–

M2.5x8 screws (x2)

–

M2.5x6 screws (x2)

•

AIO-3691 High-Speed Serial Adapter Module

2

, with the following components:

–

Female-to-female standoffs (x2)

–

M2.5x8 screws (x2)

–

M2.5x6 screws (x4)

Preparing the Environment

Ensure that the environment you are using the ATCA-3671 in meets the following
specifications.

Ambient temperature range
(IEC 60068-2-1, IEC 60068-2-2)

0 °C to 40 °C

Operating temperature range

Used with a Single-Module ATCA
Chassis

0 °C to 25 °C

Used with a 14-Slot ATCA Chassis

Dependent on final system installation

Note

 

Operating temperatures are valid only when the ATCA-3671 module is used

with the specified chassis.

Operating humidity (IEC 60068-2-56)

10% to 90% RH, noncondensing

Pollution Degree

2

Maximum altitude

2,000 m at 25 °C ambient temperature

Indoor use only.

Caution

 

Electrostatic Discharge (ESD) can damage the AIO-3681/3682 and

AIO-3691. To prevent damage, use industry-standard ESD prevention measures
during installation, maintenance, and operation.

Installing the Software

You must be an Administrator to install NI software on your computer.
1.

Install an ADE, such as LabVIEW.

2.

If you chose to install LabVIEW in step 1, install LabVIEW FPGA.

3.

Visit 

ni.com/info

 and enter the Info Code 

atcadriver

 to access the driver download

page for the latest NI ATCA FPGA Modules software.

4.

Download the NI ATCA FPGA Modules driver software.

2

Included in some ATCA-3671 kits.

ATCA-3671 Getting Started Guide

  | 

© National Instruments

  | 

5

Содержание ATCA-3671



























Отзывы:

Нет отзывов