manualshive.com logo in svg

National Instruments ATCA-3671, Руководство по началу работы, Страница: 4 / 26

Поделиться
Скачать
National Instruments ATCA-3671 Скачать руководство пользователя страница 4

Other Equipment

Required Items

In addition to the kit contents, you must provide the following additional items:
•

A chassis from the following list:
–

Single-Module ATCA Chassis

1

–

14-Slot ATCA Chassis

Note

 

If your kit does not include a chassis, you can purchase one from 

ni.com

or by contacting your local NI sales representative.

•

Rear transition module (RTM) from the following list:
–

(Recommended) RTM-3661 PCI Express Rear Transition Module for ATCA

1

–

RTM-3662 High-Speed Serial Rear Transition Module for ATCA

Note

 

The RTM-3662 is supported only in BPS. To access BPS-related

resources and documentation for the RTM-3662 within the BPS Support
Community, visit 

ni.com/info

 and enter the Info Code 

BPSsupport

.

•

DC power supply

1

 as described in the device specifications

•

Number 2 Phillips screwdriver

•

Number 1 Phillips screwdriver

•

Small flat-blade screwdriver

•

Host PC or laptop

ATCA I/O Modules (Optional)

In addition to the required items, you may choose to provide one or more of the following
ATCA I/O modules.
•

AIO-3681 Digitizer Module for FMC, with the following components:
–

Riser card (x1)

–

Male-to-female M2.5 standoffs (10 mm hex length, 6 mm thread length) (x2)

–

Male-to-female M2.5 standoffs (12.5 mm hex length, 3.5 mm thread length) (x2)

–

M2.5x8 screws (x2)

–

M2.5x6 screws (x2)

•

AIO-3682 Signal Generator Module for FMC, with the following components:
–

Riser card (x1)

–

Male-to-female M2.5 standoffs (x4)

1

Included in some ATCA-3671 kits.

4

  | 

ni.com

  | 

ATCA-3671 Getting Started Guide

Содержание ATCA-3671



























Отзывы:

Нет отзывов