Page 15
5280 BLADES
BLADE SHARPENING
• Always wear gloves and safety glasses.
• Using hand grinder, block up front of machine so blade is off the floor.
• Grind blade using a 4" diameter disk with 120 or finer grit. Be careful not to catch disk on edge or corner
of blade. Blade bevel up (See Figure A)
.
Blade bevel down (See Figure B).
• Pass grinder back and forth along blade edge being careful to hold grinder at proper angle of blade.
Grind until sharp.
• Using a good quality fine tooth hand file, use same procedure as above (See Figure C).
• Blades are sharp. Use extreme caution.
• Have plenty of sharp blades on each job so on-the-job blade sharpening is eliminated.
• It is best to resharpen dull blades on proper bench or belt grinder in the shop, so the blades are ready
for the next job.
Figure A
Figure B
Figure C
Содержание PANTHER 5280
