National Flooring Equipment PANTHER 5280, Инструкция по эксплуатации, Страница: 12 / 46

Page 11
5280 TRANSPORTATION
LOADING
ALWAYS REMOVE ALL COUNTERWEIGHTS AND BLADES BEFORE LOADING OR UNLOADING.
LIFTING BAIL
• Easy loading when not driving or using a ramp.
• Use rope, hook system or chain through eyelets located on top of machine (See Figure A).
• Location on lifting bails centrally locates balance of the machine to safely pick-up machine.
• Raise machine with a fork lift or winch.
RAMP
• Make sure ramp is clean and dry, free of grease or oil.
• Attach ramp securely to back of vehicle, making sure there is good contact (See Figure B).
• Position machine at back of ramp (See Figure A). Engage power switch and drive onto vehicle.
Figure A
WARNING:
Keep hands and feet out from
under machine.
WARNING: Make sure ramp is secure before using. Failure to do so could cause ramp to fall
away from truck, causing damage to the machine and/or injury to the operator.
WARNING: When maneuvering machine on any type of a incline (ramp, hill, etc.), wheel engage
pins MUST be in place (in engaged mode) (See Figure B) and counterweights removed.
Figure B