24 - EOLIS Air Manager 600 600 S 1200 1200 S
cleAning the Air mAnAger
Clean your unit with a soft cloth that is slightly damp to remove dust. Make sure to follow the safety instructions (see
p.17).
cleAning the SenSorS
Your air manager has 2 sensors: one particle sensor and one VOC (Volatile Organic Compounds) sensor.
these 2 sensors measure air quality in real time. For optimal operation, it is necessary to clean these sensors
at least once per month.
•
turn off your unit.
•
Open the front cover. the sensors are located above the filters, under the flap.
•
Using a damp cotton bud, clean the sensors gently and then let them dry.
•
Close the front cover. Make sure the front cover is positioned correctly, to ensure that your unit
will operate correctly. Your unit is ready to operate again.
troUbleShooting help
problem(s)
Solution(s)
the unit is no longer operating.
- Check the power plug
- Make sure the front cover was closed correctly
- Your filters may be saturated: make sure the “Pending filter change” mes-
sage does not appear in “Errors”
- Make sure the Planner is not set to OFF for a certain amount of time (Set-
tings - Planner ON/OFF).
the unit will not turn off
- Unplug your unit and wait a few minutes before turning it back on
- Make sure that Demo Mode is not active (Settings - Demo Mode ON/OFF)
You feel cool air coming from your
unit
Cool air from the ground level is drawn up, filtered, and then propelled out.
this can make the air feel cool.
the error symbol appears on the
main screen
An irregularity has been detected by EOLIS Air Manager. Click on the sym-
bol to display more details.
I can’t activate the UV lamp(s) and/or
the Ozone feature
UV lamp(s) come in models EOLIS Air Manager 600, 600 S, 1200, 1200 S.
Ozone comes in models 600 S and 1200 S.
My unit changes fan speeds
- Make sure that Active Mode is not on (smart mode)
- Make sure you have not programmed Active Mode or a set fan speed in the
planner
I activated Active mode, and the
device is showing an abnormally
high level of pollution (PM2.5 and/
or VOC), but the air purifier is not
continually operating at maximum
speed
In Active mode, EOLIS Air Manager adapts its speed to the level of pollution.
If the level of pollution is high, EOLIS Air Manager will go up to maximum
speed. however, if the level persists, it will systematically reduce its speed
regularly for your acoustic comfort.
I changed the filters, but the unit is
not detecting them
Open the front cover to run an immediate filter test. Wait for the message
“Door open. New filter?” and confirm. You can now close the front cover.
Make sure that the new filters are NatéoSanté certified.
this message appears
explanations / Actions
“hold down for 3s”
this message appears when you have pressed on the following icons: Night
mode, Childproof, On/Off. to activate these features, hold down the icon for
3 seconds.
