manualshive.com logo in svg

NatComm LCU1, Руководство пользователя, Страница: 4 / 16

Поделиться
Скачать
NatComm LCU1 Скачать руководство пользователя страница 4

Page 4   

National Communications

PRODUCT DESCRIPTION

LCU

 

is designed to connect in PARALLEL to a telephone line. It has a single

RJ11 (6 pin) Telephone Line input port.

Model LCU1 provides One 4 pin RJ port to connect to the internal relay.

Models LCU2 and LCU3 provides Two 4 pin RJ ports to connect to the internal
relays.

Connection Box(s) are supplied with short leads for easy connection to  LCU.

Each Connection Box has 2 Screw Terminals to provide for connection of
your electrical equipment to the Internal Relays of LCU.

Once installed, LCU will automatically respond to any 1,2,3 or 4 digit DTMF
code that is programmed by the user. LCU responds to all DTMF commands,
ie: 0-9,*,#,A,B,C &D.

The closure time of the relay can also be set by the user for periods of  01
to 99 seconds. If a setting of 00 is entered, LCU will provide latching of the
relay on a toggle basis, so that equipment (such as a 12V light, Video
equipment etc) can be switched ON or OFF as required.

LCU can also be set to respond to DMTF commands from Incoming calls
only, or Incoming and Outgoing calls (default setting).

LCU's can also be programmed to respond to a set code within a dialed
sequence.

For example, a Door Phone could call a specific business within a Multi
Tenanted Office Building. The operator after answering could then Dial
123456 and then hang up.

 One LCU relay set to respond to 12 could open the front door for 15 seconds.
A second LCU relay set to respond to 34 could alert the Elevators to allow
access to Floor 3. A third LCU relay set to respond to 56 could release the
Door Strike which allows access to offices on Floor 3.

LCU is provided with a Two Year Factory Warranty.

Содержание LCU1

















Отзывы:

Нет отзывов