8.
ENTER REQUIRED RELAY CLOSURE TIME
Enter 2 digits only (01 to 99) seconds
You should hear 3 short beeps
If you do not hear 3 beeps, return to the start (1).
9.
ENTER MAXIMUM AUTO ANSWER CALL TIME
This is the amount of time that LCU3 will hold a call waiting for
commands after answering. The default setting is 20 seconds, which
is the minimum setting. This can be increased up to 99 seconds if
required.
PRESS #6 to program Maximum Call Time
If you do not hear 1 beep, return to the start (1).
Enter 2 digits only (20 to 99) seconds
You should hear 3 short beeps
If you do not hear 3 beeps, return to the start (1).
You can now :
a)
Program LCU to respond to INCOMING calls only
b)
Program LCU to respond to YOUR CODE within a group of
digits.
Proceed Below OR
c)
Hang Up if your programming is complete
10.
DO YOU REQUIRE LCU3 TO RESPOND TO INCOMING CALLS ONLY
PRESS #3x
x = 0
To respond for Incoming calls only
x = 1
To respond to Incoming and Outgoing calls (DEFAULT)
11.
DO YOU REQUIRE LCU3 TO RESPOND TO PIN within a Sequence
PRESS #4x
x = 0
To respond to exact code only (DEFAULT)
x = 1
To respond to exact code within a group of digits
12.
DO YOU WANT TO CHANGE THE NUMBER OF RINGS TO ANSWER OR
DISABLE AUTOANSWER
PRESS #0xx
xx = 00-20 Rings
To change Autoanswer to 5 rings, enter 05
To change Autoanswer to 15 rings, enter 15
To Disable Autoanswer, enter 00
13.
PROGRAMMING COMPLETE - HANG UP
National Communications
Page 15