Page 14
Natcomm
UNIT PROGRAMMING
There are THREE user programmable functions as follows:
DOOR PHONE CALL ADVICE TONES
5 shorts ‘beeps’ can be injected into the Door Phone call, immediately after
answer, to advise you that the incoming call has originated from your Door
Phone. This facility is very useful for those users who have no other
indication that the incoming call is from the Door Phone.
Allowable Range
:
ON or OFF
Default Setting is
:
OFF
MAXIMUM DOOR PHONE CALL TIME
Your DS5 unit has been pre-programmed to detect AUSTRALIAN ‘Hang Up’
tones to determine when the call is complete and to terminate the call
connection. Due to the possibility that your equipment may not generate ‘Hang
Up’ tones or suitable tones, a maximum allowable time limit is set for a Door
Phone call.
If your DS5 does not automatically terminate on ‘hang up’ tone detection, you
should set a lower time setting, which is still long enough to communicate with
your visitors. DS5 will terminate all Door Phone calls at this time setting.
Allowable Range
:
15 – 99 seconds
Default Setting is
:
99 seconds
Note: If needed you can increase the max call time by a factor of 10 times. See page
15 for further detail.
LOCK ACTIVATE TIME
DS5 has a SINGLE LOCK facility fitted as standard.
When ** is pressed, the LOCK will remain OPEN for a set period of
time (default is 15 seconds). This time can be changed from 01 - 99 seconds.
Allowable Range
:
1 to 99 seconds
Default Setting is
:
15 seconds