Natco ANSI Z 21.10.3, Руководство по обслуживанию

Страница: 38 / 40

PAGE: 38
Note: These overall dimensions are approximate /– 1".
Heat Transfer Products reserves the right to change or discontinue models without notice.
NOTE:
A BRONZE CIRCULATOR BETWEEN THE DOMESTIC HOT WATER OUTLET AND DOMESTIC COLD WATER INLET IS
REQUIRED TO ACHIEVE RATINGS BELOW:
VOYAGER SSVH MODEL SIZING CHART
Flow TEMPERATURE RISE (DEGREES F.)
GPM 15 20 25 30
2 15,000 20,000 25,000 30,000
3 22,500 30,000 37,500 45,000
4 30,000 40,000 50,000 60,000
5 37,500 50,000 62,500 75,000
6 45,000 60,000 75,000 90,000*
7 52,500 70,000 87,500* 105,000*
8 60,000 80,000 100,000* N/R
9 71,400** 95,200** 119,000** 124,500**
10 85,000** 113,250** 140,000** 140,000**
* FOR SSVH-130 MODELS ONLY! **FOR SSVH-199-80 MODELS ONLY!
NOTE:
THE SUPER-E MUST BE SET 25 DEGREES F. ABOVE THE SYSTEM TEMPERATURE. THE ABOVE CHART IS BASED ON
USING THE CIRCULATOR BETWEEN THE DOMESTIC COLD WATER INLET AND THE DOMESTIC HOT WATER OUTLET. FOR
SET POINT TEMPERATURES ABOVE 120 DEGREES F., YOU MUST USE AN ANTI-SCALD TEMPERING VALVE ON THE OUT-
LET TO DOMESTIC HOT WATER FIXTURES.
VOYAGER FIRST DRAW CAPACITY (In minutes) AT 140 DEGREES F.
Model 2 GPM 3 GPM 4 GPM 5 GPM 6 GPM 7 GPM 8 GPM
SSVH90-45 20 15 9 7 5 4 3
SSVH130-45 20 16 12 10 9 7 6
SSVH199-80 00 00 15 14 13 12 10
VOYAGER FIRST DRAW CAPACITY (In minutes) AT 115 DEGREES F.
Model 2 GPM 3 GPM 4 GPM 5 GPM 6 GPM 7 GPM 8 GPM
SSVH90-45 30 23 14 10 8 6 5
SSVH130-45 31 24 18 16 14 11 10
SSVH199-80 00 00 23 21 20 18 15
MODEL HEIGHT WIDTH DEPTH INPUT FIRST HR. RATING
SSVH90-45 42" 24" 32" 90,000 125 U.S. gallons
SSVH130-45 42" 24" 32" 130,000 180 U.S. gallons
SSVH199-80 72" 24" 32" 199,000 300 U.S. gallons
MODEL HEAT EXCH. HEAT EXCH. BTU RECOVERY VENT WEIGHT
SSVH90-45 32 Sq. Ft. 81,000 95% 3" 205 Lbs.
SSVH130-45 32 Sq. Ft. 110,000 94% 3" 205 Lbs.
SSVH199-80 32 Sq. Ft. 140,000 94% 3" 255 Lbs.