background image

When battery life is low, a battery icon will flash in the display screen to indicate only a
few hours of battery life remain. See Figure 13. When the battery icon appears, replace
the batteries as soon as possible (See section VIII, “Changing the Batteries”).

C. Reset

At the beginning of each ride you’ll want to perform a reset to clear from memory the
data from your previous ride.

1.

To clear the data, press and hold the SET button. After 3 seconds, “CLEAR” will be
displayed (at this point no data has been deleted). Continue to hold the SET button
and in another 3 seconds “DONE” will appear, indicating that all accumulated data
(except Total Distance and Total Ride Time) has been cleared from memory. See
Figure 14.

2.

To reset Total Distance and Total Ride Time (as well as all other data), press and
hold both the SET and MODE buttons. After 8 seconds “CLEAR” will be displayed (at
this point no data has been deleted). Continue to hold the SET and MODE buttons,
and in another 2 seconds “DONE” will appear, indicating that all accumulated data
has been cleared from memory.

D. Auto Off

After 2 minutes of inactivity (no pedaling or button presses) the system will automatically
switch off to prolong battery life. Current values will be maintained. To turn the system
back on press either button (SET or MODE) or begin pedaling.

E. Summary List of Ride Data

VII. Troubleshooting

1. Display not working

a.

Check cable connections to the computer console.

b.

Replace the batteries in the computer console. See section VIII, “Changing the
Batteries.”

2. Resistance level indicator stays on level 1

a.

Check cable connection between the computer console and the shift lever.

3. Data Values Erratic

a.

Check cable connections to the computer console.

b.

Replace the batteries in the computer console. See section VIII, “Changing the
Batteries.”

4. Low Battery Indicator Appears

a.

Replace the batteries in the computer console. See section VIII, “Changing the
Batteries.”

Note:

The resistance unit and the computer console contain no user-serviceable parts. 

6

13

3

6

Seconds

14

Low
Battery
Indicator

Содержание NB-T5000E









Отзывы: