1.
Press either button (SET or MODE) or begin pedaling to activate the computer.
Current Speed and other data should immediately appear in the display screen.
2. Adjust the resistance level (simulated slope) using the shift lever. Rotating the shift
lever from the lowest setting (1) to the highest setting (5) will increase the resist-
ance.
Note:
The Slope and Power readings will vary from rider to rider according to the weight
value entered in the set-up process (see section V). Therefore, the Slope and Power
readings may differ for two riders riding at the same speed and same resistance level
settings. The indicated Slope value for each resistance setting is calculated based on the
combined rider and bicycle weight.
Note:
For accurate Slope, Power and Elevation Gain data, remember to reset the
weight value (see section V) when switching between riders.
A. Screens
Three display screens provide various training data as described below. Use the MODE
button to scroll between the three screens. All screens can be viewed during a ride.
Screen 1 (Figure 10)
Displays current values for Power (watts), Speed, Slope, Trip Distance and Ride
Time. Current resistance level setting is indicated on the right side of the display.
The speed comparison arrows in the upper right corner of the screen compare
current speed to average speed. An upward arrow indicates your current speed is above
your average speed. A downward arrow indicates your current speed is below your aver-
age speed.
A. Current Power
B. Current Speed
C. Slope
D. Trip Distance
E. Ride Time
F. Resistance Level
G. Speed Comparison
Screen 2 (Figure 11)
Displays average values for Power (watts), Speed and Slope. Also displays Trip
Distance, Ride Time, resistance level setting and Speed Comparison arrows.
A. Average Power
B. Average Speed
C. Average Slope
D. Trip Distance
E. Ride Time
F. Resistance Level
G. Speed Comparison
Screen 3 (Figure 12)
Displays maximum values for Power (watts) and Speed, Elevation Gain, Total
Distance (odometer) and Total Ride Time. Also displays resistance level setting and
Speed Comparison arrows. The Total Distance and Total Ride Time values represent
total distance and time accumulated on all rides to date, and will not be reset when
the data screens are cleared (see Section C, “Reset”).
A. Maximum Power
B. Maximum Speed
C. Elevation Gain
D. Total Distance
E. Total Ride Time
F. Resistance Level
G. Speed Comparison
B. Battery Life Indicator
5
7
8
9
10
11
12
