Registration
Enter the register/login interface and input your phone number to receive your
verification code. Alternatively, you can get your verification code by email.
1.
2.
3.
4.
Then proceed to enter your family/home information.
5.
6.
07
06
Pairing Device
Connect your phone to your 2.4GHz WIFI and open the NASH
Smart app. Note the device only supports 2.4GHz, not 5.0Ghz!
Preparation: Plug in your device so it is in standby mode. You
will hear a sound, and the air quality indicator will show a dim
red color. Do not press the power button yet.
Then press and hold the “WiFi/Filter Reset” button for 5 seconds
until the WIFI/indicator light blinks rapidly.
Click “Add device” in the APP and then choose “air purifier”.
Make sure the WIFI indicator light on the air purifier is still blinking
rapidly, then tap “Confirm the indicator is rapidly blinking” in the
APP. If the WIFI indictor light on the air purifier is not blinking then
press and hold the “WiFi/Filter Reset” button for 5 seconds again.
Choose your local 2.4GHz WIFI (The same as your phone is
connected to), enter the correct WIFI password and tap “Next”.
Wait for the configuration to be successful, then tap ”Complete”.
Congratulations! You are now all set to use the air purifier with the
NASH Smart APP!
