19
18
Fault phenomenon
Inspection / solution
Button no response
1.Is the filter dirty? → Clean the filter.
Has the filter not been replaced for a long time?
→ Replace the filter with a new one.
The smell of the air outlet makes
people feel uncomfortable
1. Has the plastic-bag from the filter been removed? If not,
remove it a.s.a.p.!
2. Is the filter incorrectly installed? Please refer to
instructions provided earlier in the manual.
The purifier runs for a long time
but the air quality has not been
significantly improved
The filter change light is on: This indicates that the filter
change timer has reached the set value of 1500h. After
changing the filter, press and hold the “WiFi/Filter Reset”
button to reset the timer back to 0.
Technical Specifications
NASH AP-1 PureSmart
110V-120V~
50Hz/60Hz
Removes pollutants such as particulate matter, gas pollutants and
microorganisms in the air.
1.Washable pre-filter
2.Composite carbon cloth filter(HEPA+Activated carbon)
65
W
200m
3
/h
P1
Qualified (Particulates)
57dB(A)
14-24 m
2
325x172x510mm
Product Name
Rated Voltage
Rated Frequency
Product Usage
Method of Cleaning
Rated Power
Particulates CADR
Particulates CCM
Energy Efficiency Index
Noise
Applicable area
Product size
Weight
5kg
Cannot turn on or press buttons
(No response)
1.Is the power cord plugged in?
→ Plug in the power cord.
2
.
Is the front cover of the purifier covered?
→ Uncover the front cover of the purifier.
.
Troubleshooting
Common faults, including fault code description and troubleshooting:
Box Contents
NASH AP-1 PureSmart
1 pcs
Prefilter
1 pcs
HEPA+ filter
1 pcs
Instruction Manual
1 pcs
