NASH Filter Technology Introduction
Pre-filter
The pre-filter is the primary filter of the air purifier. It is mainly used to filter
dust particles above 5 microns, including large particles of dust, dander,
pollen, floating matter and other pollutants. It can be cleaned and reused
multiple times.
2-in-1 HEPA+ H11 activated carbon composite filter
The activated carbon filter is based on the highest standard of filter
material for household purifier filtration. The loose polymer material is
used as the carrier, and the high-efficiency catalyst is attached to the
surface of the activated carbon to make the adsorption capacity
strong. The airflow resistance is small, and the filter function is good.
With high-quality powdered activated carbon used as adsorbent
material, it has cutting-edge adsorption and dust collecting levels,
good formability, high strength and low airflow resistance. Activated
carbon can absorb harmful gases such as benzene, toluene, xylene,
formaldehyde and ammonia. The HEPA filter filters 0.3 micron
particles of bacteria, smoke and dust in the air, and the filtration
efficiency is over 99%. Combined with the integrated multi-purpose
filter, the HEPA filter filters out tiny particles larger than 20
nanometers in diameter, including bacterial molds, dust, allergens
Installation
Filter installation (Mandatory)
1.Remove the front panel by pressing the “PUSH” logo on both sides.
2.Remove the pre-filter.
3.Unpack the filter from the plastic pack.
4.Install filter, please make sure that the side with the pull tab is facing out.
5.Re-install the pre-filter.
6.Re-install the front panel.
03
02
Product Features
Air Outlet
Control Panel
Buckle
Front panel /
Air Inlet
Handle
Sensor
and some viruses, while also filtering out smoke. The World Health
Organization publication shows that the poultry flu virus, human flu
virus, and legionella bacteria are all larger than 20 nanometers.
