Actual product may vary slightly from photo. Nasco reserves the right to change product color, materials,
supplies, or function as needed.
ABOUT THE SIMULATOR
The
Life
/
form
®
Child Airway Management Trainer is the most realistic simulator available for the
training of intubation skills. Nasco has taken great care to create an airway management trainer that is
anatomically correct in respect to both size and detail.
Landmarks include nostrils, teeth, tongue, oral and nasal pharynx, larynx, epiglottis, arytenoids, false
and true vocal cords, cricoid ring, tracheal rings, trachea, esophagus, lungs, and stomach.
The
Life
/
form
®
Child Airway Management Trainer allows you to practice oral, digital, and nasal intu-
bation. Suction techniques can also be performed and evaluated. The simulator was designed to use an
uncuffed endotracheal tube measuring up to 5.0 mm I.D.
LIST OF COMPONENTS
A.
Child Airway Management Trainer Head with Lungs and Stomach
B.
Mounting Board
C.
8-oz. Pump Spray Lubricant
D.
Case (Not Pictured)
LUBRICATION
Before using the
Life
/
form
®
Child Airway Management Trainer, lubricate both the tube and airway with
the Nasco lubricant provided.
Note:
Nasco recommends the use of the provided lubricant or a similar vegetable-based lubricant for the
Child Airway Management Trainer. The use of a silicone-based or similar lubricant may cause damage
to the simulator, thus voiding Nasco’s warranty on the trainer.
CLEANING THE FACE
Normal soil can be removed from the face of the trainer with mild soapy water. Nasco Cleaner
(LF09919U) will remove stubborn stains. Simply apply Nasco Cleaner to the soiled area and wipe clean
with a soft cloth or paper towel.
Never place the trainer on any kind of printed paper or plastic. These materials will transfer indelible
stains. Ball-point pens will also make indelible stains. Do not use any cosmetics.
REMOVING THE CHILD AIRWAY MANAGEMENT TRAINER HEAD
FROM THE MOUNTING BOARD
1.
Remove the lungs and stomach from the trainer by loosening the clamps that hold them in place.
The clamps are loosened by twisting each side of the clamp in opposite directions.
2.
Now turn the head until the keys on the neck align with the slots in the mounting bracket and slide
out.
3.
To replace the head on the mounting board, simply reverse the previous two steps.
STORAGE OF YOUR SIMULATOR
It is vital that the packing foam is retained for correct storage of your simulator. The unit must be stored
as you received it to avoid damaging the simulator. Follow these steps when placing the simulator in the
case for storage or transport.
•
Place the board in the case so that the wide end of the board is positioned under the two cleats
inside the case.
•
Making sure the head is in the mounting bracket, turn the head 90° to its left so that it is facing the
hinged side of the case.
•
Place the foam block into position over the neck, just below the chin, so that the round hole is up.
•
The case can now be closed. Your trainer will be protected from excessive movement within the case.
AVAILABLE SUPPLIES
LF03644U
Pump Spray Lubricant
LF03627U
Replacement Lungs Set
LF03628U
Replacement Stomach
LF03631U
Replacement Headskin with Airway
A.
B.
C.
HC190001INM16.indd 3-4
2/5/19 2:26 PM
