Nasco Life/form LF01155U, Инструкция по эксплуатации

Страница: 4 / 10

4 4
SETTING UP THE AIRWAY
1. The CPR Dog comes with the disposable lower airway already installed. (See Figure 1.)
Before use: Remove the soft black nose from the valve stem and wash in mild detergent
and water. Sanitize in a bleach solution according to CDC guidelines. Rinse well, dry, and
reassemble.
2. To begin training, simply position your face shield (not included) over the dog’s muzzle
and push the valve end of the nosepiece through the shield into the white fitting in the
muzzle. If necessary, cut a small X in the shield through which to fit the nosepiece.
(See Figure 2.)
Note: The use of a face shield is recommended to prevent direct mouth contact with
the fur.
3. After use: Noses and valves should be discarded. Any attempts at cleaning or disinfecting
for repeated re-use are done at the customer’s own risk.
Muzzle Fur Folds Over Airway
Face Shield
Figure 2
Zipper
REPLACING THE AIRWAY
1. Remove the nosepiece.
2. Open the zipper along the dog’s back
far enough to fold back the fur and
expose the airway. (See Figure 3.)
Figure 3
Lung
Exhaust
Tubing
Nosepiece
with Valve
Fitting
Valve
Disposable Lower Airway
Figure 1
Actual product may vary slightly from photo. Nasco reserves the right to change product
color, materials, supplies, or function as needed.
SETTING UP THE AIRWAY
1. The CPR Dog comes with the disposable lower airway already installed. (See Figure 1.)
Before use: Remove the soft black nose from the valve stem and wash in mild detergent
and water. Sanitize in a bleach solution according to CDC guidelines. Rinse well, dry, and
reassemble.
2. To begin training, simply position your face shield (not included) over the dog’s muzzle
and push the valve end of the nosepiece through the shield into the white fitting in the
muzzle. If necessary, cut a small X in the shield through which to fit the nosepiece.
(See Figure 2.)
Note: The use of a face shield is recommended to prevent direct mouth contact with
the fur.
3. After use: Noses and valves should be discarded. Any attempts at cleaning or disinfecting
for repeated re-use are done at the customer’s own risk.
Muzzle Fur Folds Over Airway
Face Shield
Figure 2
Zipper
REPLACING THE AIRWAY
1. Remove the nosepiece.
2. Open the zipper along the dog’s back
far enough to fold back the fur and
expose the airway. (See Figure 3.)
Figure 3
Lung
Exhaust
Tubing
Nosepiece
with Valve
Fitting
Valve
Disposable Lower Airway
Figure 1
Actual product may vary slightly from photo. Nasco reserves the right to change product
color, materials, supplies, or function as needed.
HC190001INM9.indd 7-8 1/16/19 8:44 AM