Nasco Life/form LF01155U, Инструкция по эксплуатации

Страница: 9 / 10

9 9
Replacing the Vein Tubing
1. Remove the leg fur.
2. Remove the old tubing from the leg core channel and discard.
3. Snap the new tubing into place, making sure that it is firmly seated in the channel.
(See Figure 8.) Make sure it isn’t pinched or kinked at any point, especially where it angles
upward at the shoulder.
4. Unzip the body fur part way and feed the inlet tube through the right leg hole and out at
the back of the face. Reattach the fur and all clamps and fittings.
Caring for the IV Leg
1. After each class, drain the blood and return it to the bottle for storage, tightly capped.
2. Flush the system thoroughly by running clear water through it into a sink or basin.
3. Open all clamps and drain excess water.
4. Use only
Life / form
®
Replacement Veins, as they are specially treated to be compatible
with the leg core material.
CARE OF THE TRAINER
Cleaning the Fur
The body fur may be unzipped and removed for cleaning.
1. Nasco recommends hand washing in cool water with a few drops of mild soap or deter-
gent. Rinse thoroughly.
2. Roll in a towel to remove excess water, then allow to air dry. Gently brush fur if desired.
A small amount of “shedding” is normal.
3. The fur on the face and legs may be cleaned by rubbing with a damp cloth. Do not
immerse the dog in water. Never use cleaning fluids or solvents.
REPLACEMENT PARTS
LF01022U Fluid Supply Stand
LF01130U 500 ml Fluid Supply Bag
LF01157U Muzzle Replacement, pkg. of 6 (2009 and older)
LF01158U Disposable Lower Airways, pkg. of 10
LF01164U Disposable Nosepieces, pkg. of 10
LF01179U Replacement Veins, pkg. of 3
Replacing the Vein Tubing
1. Remove the leg fur.
2. Remove the old tubing from the leg core channel and discard.
3. Snap the new tubing into place, making sure that it is firmly seated in the channel.
(See Figure 8.) Make sure it isn’t pinched or kinked at any point, especially where it angles
upward at the shoulder.
4. Unzip the body fur part way and feed the inlet tube through the right leg hole and out at
the back of the face. Reattach the fur and all clamps and fittings.
Caring for the IV Leg
1. After each class, drain the blood and return it to the bottle for storage, tightly capped.
2. Flush the system thoroughly by running clear water through it into a sink or basin.
3. Open all clamps and drain excess water.
4. Use only
Life / form
®
Replacement Veins, as they are specially treated to be compatible
with the leg core material.
CARE OF THE TRAINER
Cleaning the Fur
The body fur may be unzipped and removed for cleaning.
1. Nasco recommends hand washing in cool water with a few drops of mild soap or deter-
gent. Rinse thoroughly.
2. Roll in a towel to remove excess water, then allow to air dry. Gently brush fur if desired.
A small amount of “shedding” is normal.
3. The fur on the face and legs may be cleaned by rubbing with a damp cloth. Do not
immerse the dog in water. Never use cleaning fluids or solvents.
REPLACEMENT PARTS
LF01022U Fluid Supply Stand
LF01130U 500 ml Fluid Supply Bag
LF01157U Muzzle Replacement, pkg. of 6 (2009 and older)
LF01158U Disposable Lower Airways, pkg. of 10
LF01164U Disposable Nosepieces, pkg. of 10
LF01179U Replacement Veins, pkg. of 3
HC190001INM9.indd 17-18 1/16/19 8:45 AM