![Nasco Healthcare TERi LF04302EX Скачать руководство пользователя страница 31](http://html1.mh-extra.com/html/nasco-healthcare/teri-lf04302ex/teri-lf04302ex_instruction-manual_3365793031.webp)
31
Set Up
Auscultation
Listening to Selected Heart and Lung Sounds
1 . Follow the instructions above to activate remote
control, SmartScope
™
, and select desired sounds .
2 . Place the earpieces of the SmartScope
™
in ears
angled in a forward position .
3 . Place the diaphragm of the SmartScope
™
over
the appropriate sites on the manikin .
4 . Use included laminated key cards for location
instruction .
5 . For additional location instruction, use the green
color-coded stickers for lung sites found and the
blue color-coded stickers for the heart sites found .
6 . Correct placement of the SmartScope
™
is
required to hear the sounds . Moving the
SmartScope™ slowly across the area will help
locate the sensor in the torso so that the sounds
can be heard .
Note: The SmartScope
™
is only for use with
the Auscultation feature . It is not a standard
stethoscope . (See Figure A)
Using the Amplified Speaker (purchased
separately LF01189U)
1 . Locate the SmartScope
™
and speaker cord
included with the 30-watt amplifier/speaker .
2 . Plug the speaker cord into the speaker jack on
top of the SmartScope
™
box .
3 . Plug the amplifier/speaker into the 110V (or 220V)
power source .
4 . When the speaker is connected, the
SmartScope
™
earpieces will not work; sounds will
only be amplified through the speaker .
5 . Select the desired heart and lung sounds
following the instructions above .
6 . Place the diaphragm of the SmartScope
™
over
the appropriate sites on the manikin .
Note: The remote has a battery saver mode that
shuts the unit down after eight minutes if the
remote is left on the same setting . To prevent this
shutdown, select a different heart or lung sound
within the eight-minute time period .
Care and Maintenance for Auscultation Feature
1 . Prior to storing equipment, ensure the batteries
in the remote control and SmartScope
™
are
removed .
2 . Adhesive remaining on the manikin from use
of the blue and green location stickers can be
removed using Nasco cleaner . Apply Nasco
Cleaner to a clean, soft, dry cloth and wipe
residual adhesive . Be cautious not to over-wipe
painted areas .
3 . Newsprint, ballpoint pen, and printed plastics will
leave an indelible mark .
4 . Alcohol prep pads are included to sterilize
SmartScope
™
earpieces between users .
Fig A.
Содержание TERi LF04302EX
Страница 39: ...YEARS 5 Up to 5 years warranty...
Страница 40: ...IM 601006 10 20 2020 Nasco Healthcare...