USB2.0 NAS Dongle User’s Manual
1.0 Product overview
Thank you for purchasing USB2.0 NAS Dongle storage device. Now you can easily add
USB2.0 Storage into your Network. Before using this device please read the Key Features
below.
Key Features
- Support USB mass storage device.
- Support USB1.1/2.0 specification.
- Compatible with Windows 2000/XP/VISTA, Mac 10.5.4 above.
- Support DHCP server
- Under network environment, it supports one 10/100Mbps Ethernet port.
- Support Samba server, by which the server hosts 64 clients on line
- Support Hardware Reset function by pressing the Power On/Off key for five seconds
- Support FTP server, 5 FTP users at the same time
- Password management provides secure access to HDD and web management
The NAS Dongle is a flexible, economical and powerful unit for your Network. Follow the
instructions to help you connect, set it up, and configure it.
Network environment
There are 3 different setup conditions you can choose:
- Setup NAS Dongle as DHCP Client:
If your NAS Dongle operates under a built-in DHCP server router (ex. Internet Sharing Hub),
it will obtain an IP from DHCP Server automatically.
- Setup NAS Dongle as DHCP Server:
If your operating environment does not support DHCP server, NAS Dongle will immediately
act as DHCP server and assign an IP for installation.
- In Static IP environment:
You need first configure the IP for NAS Dongle to operate in the static IP environment. For
Configuring details, please refer to “IP Config” setup page.
