11
NARVON
5.4. Electrical connection
This job may be performed only by specialized
technical personnel.
Before plugging in the machine, make sure that the main
switch is on “0”.
The Purchaser is responsible for making the electrical
connection.
The machine must be connected to the electricity mains
bymeans of the plug fitted on the power cord. Be sure to
comply with:
• the technical regulations and standards in force at the
time of installation;
• the data shown on the rating plate on the side of the
machine.
Warning: The electric outlet must be situated
in a place easily within reach of the user,
so that no effort is required in order to
disconnect the machine from the power
supply when necessary.
If the power cord is damaged, you must have it replaced
either by the manufacturer or a specialized technician
It is forbidden:
•
to use extension cords of any type;
•
to replace the original plug;
•
to use adapters.
6. OPERATION
Before the machine may be started up for the first time,
specialized technical personnel must check that it functions
properly.
6.1 Preparing the product
Warning: Product may be poured into the
bowl only when the machine is off and
unplugged.
Fig.6 Never only use water
Dilute and mix the CONCENTRATE with WATER in a
suitable container, following the manufacturer’s directions.
THE MIXTURE OBTAINED MUST HAVE A MINIMUM
SUGAR CONTENT OF 13° BRIX - A lower concentration
may damage the augers and/or gearmotors.
To remove the lid from the bowl, follow these instructions:
1 lift the lid;
Warning: Do not force the lid opening
in case of difficulty.
