NARGESA MT500 A, Инструкция

Страница: 6 / 48

INSTRUCTIONS BOOK OF FORGING TWISTING MACHINE MT500 A 5
1. INFORMATION ABOUT THE MACHINE
1.1 Machine identification
1.2 Normal usage of the machine
The machine has been basically disigned to shape cold forge materials. It scrolls bars, it makes spirals of
flat bars, etc. All drawings that can be made with a rotary head and a stand point will be easily makeable by
using this machine. It will only be limited by the room it accupies and the engine power.
A set ofstandard tooling is supplied along with the machine, with which you will be able to make most of the
basic shapes. However the manufacturer can provide the user with the fitting mould for the head, so he can
create his own shapes.
1.3 Noise caused by the machine
In this case noise could be considered as non- existent under normall working conditions.
1.4 Vibrations
Like noise, vibrations are almost non-existent for this a fixed machine and it has got a low head rotation
speed.
1.5 Operative’s natural working place
The first zone is the machine bench, to the left of the drive where the twisting operation and the coil
making is made.
Si se produce un accidente por negligencia del operario, por no atenerse a las normas de
seguridad expuestas en el manual, PRADA NARGESA S.L no se hace responsable.
Trademark
Nargesa
Type
Twisting machine
Model
MT500A