NARGESA MT500 A, Инструкция

Страница: 15 / 48

INSTRUCTIONS BOOK OF FORGING TWISTING MACHINE MT500 A 14
In order to make the different parst, the only thing to do is follow the steps up to now and then end up the
operation by registering those torsions in th different memories.
It is not necessary to detele one memory in order to make one new torsion once you have all memories
filled since the memory will be automatically deleted just by overwriting on an already existing memory.
In order to repeat one torsion that is already saved in a given memory, just press the button for the memory
that defines the torsion to be made and follow the clear indications that are shown in the LCD display.
Moreover the user has the possibility to control the number of pieces made with each of the 8 memories
that are available For that, when it appears the label Nargesa MT150A, in Stand By or Nargesa MT500A, in
Stand By (depending on tha machine that he’s working with), the user should press the button for Control
of the fabricated pieces (a label will show up on the display Reading Select Memory. Once this has been
done just select the memory to be visualized so a label will show up on the screen Reading: Memory nº:
01, CNT to be deleted. In case the user wants to delete this memory once he has checked the number of
manufactured pieces on it, just press again the control key CNT.
Apart from what has been said up to now, the user has one key to escape Escape which enables him to
go back to the screen on default Nargesa MT150A, in Stand By, which can be used whenever there
ins no torsion in process if it is so, then it is necessary to finish it before going back to stand by.
This system has also a safety device that makes the machine locates the starting point from which all
references are taken, each time the machine is activated after having been stopped. So eventhough the
machine makes a torsion again, it will find the memory that had been chosen for the torsion that is required
now.
It also has a system for automatic control to spots if tha machine has lost the point of reference by any
given reason. It doesn’t usually happen, however just in case, the user must follow the steps that are
clearly indicated onthe LCD display.
Last but no least, it is to be pointed out that the developed system has been designed according to the
safety regulations, and that in case an emrgency stop situation occurs the machine won’t be able to be
used again until it recovers all its normality when it will find the starting point of the machine again
whenever the user presses the button for Escape, according to the new situation and following the
indications given on the LCD display,) in order to guarantee that all refrences are still reliable.