NARGESA MT500 A, Инструкция

Страница: 43 / 48

INSTRUCTIONS BOOK OF FORGING TWISTING MACHINE MT500 A 42
8 - Do the pull out by using the black set of buttons, until you
can get the material out.
It will only enable you to make the movement of the head the
opposite direction to the one the torsion has been made.
9 - Then press the pull out key and the torsion will be saved
along with its pull out operation.
9.2. Mass production of pieces
10 - Once the operation is saved in a memory, if you press
the head once it will find the starting point. Plce the material
in when it has stopped and fix it, then press the same key of
the memory and the head will start makingthe torsion. These
two operations are the ones you should be doing so you can
make scrolls.