NARGESA MT500 A, Инструкция

Страница: 10 / 48

INSTRUCTIONS BOOK OF FORGING TWISTING MACHINE MT500 A 9
3. INSTALMENT AND STARTING UP
3.1. Instructions to fix it
When the machine is put down by the crane it will be necessary to do it correctly so it doesn’t have to be
moved once it is on the floor. If it isn’t possible then put in a moveable base in order to transport it to the
finel proper location.
The machine will be fixed on the floor by its own weight, thus it is very important to put it in a flat and even
surface.
3.2. Admissible outer conditions
- Environmental temperature: B5ºC and +40ºC without exc35ºC as average
temperature during 24h.
- Humidity: Between 30% and 90% without water condensation.
3.3. Safety systems for the operative
The final place location for the machine must be estimated counting on the space that the material bar will
be occupating while being shaped.
3.4. Periodicity of revisions
Check up the oil level every 2000 hours of performance.
Never ever touch the material bar while the machine is performing.