NARGESA H1, Инструкция

Страница: 22 / 33

INSTRUCTIONS BOOK FOR FURNACE H1 21
5.7. Lighting up the furnace
To proceed with the ignition of the furnace, we’ll follow the steps below:
1. Make sure all gas valves are completely closed.
2. Make sure the
Combustión chamber is empty and free from any other element.
3. Connect the Adaptor to the gas bottle.
4. Verify that all gas connections between the bottle and the furnace are correctly connected and the¡at there
is no leak.
5. Checkup that the gas work pressure is between 0,1 and 1,5 bars. (Pressure recommended by Nargesa: 0,2
to 1 bar).
6. Open the
Gas valve 1 , a few degrees.
7. Press the Thermocouple pushbutton and the Electronic ignition pushbutton .
8. When the Burner lits up, reléase the Electronic ignition button.
9. Wait 20 seconds and reléase the Thermocouple pushbutton .
10. Open the Gas valve 1 progressively ‘til its limit.
11. Progressively increase the gas pressure up to 1 bar. (Pressure recommended by Nargesa: 1 bar).
5.8. Shutdown the Furnace
To proceed with the shutdown of the furnace:
1. Turn the
Gas valve 2 clockwise until it is completely closed.
2. Disconnect the Adapter from the gas bottle.