NARGESA CC90, Инструкция

Страница: 11 / 36

- 11 -
2 - AXIS POSITIONER LIMIT CC90
ATTENTION: The limit moves while the machine does the bending. Do not place anything in the Limit
work area that may obstruct its movement.
4. LIMIT LOCATION AND INSTALLATION
4.1. Limit Location
Try to position the machine and limit in the proper location so they do not have to be moved; otherwise,
follow the steps described in the Transport section (no. 2). Position over a smooth, level surface to prevent
vibrations and movements during bending operations
.
4.2. Dimensions and Work Area
Take the dimensions, limit work area and the lengths of any part to be worked into consideration when po-
sitioning the limit.
The pipe bender may be used by a single operator who must stand on the side of the limit to manage the
adjustable stoppers and the pipe securing tray.
Before starting the bending process, the operator shall adjust the limit and secure the material while the
machine is off.
Figure 6. Limit Work Area
Figure 7. Layout
4.3. Acceptable External Conditions
- A room temperature of +5ºC to +40ºC without exceeding an average temperature of +35ºC over 24 hours.
- Moisture of 30 - 90% without water condensation.