NARGESA CC90, Инструкция

Страница: 23 / 36

- 23 -
2 - AXIS POSITIONER LIMIT CC90
5. INSTRUCTIONS FOR USE
5.1. Limit Features and Use
The CC90 limit is used to position the pipe in an exact position for bending.
5.2. Securing the Pipe to the Limit
Secure the pipe to the securing tray by adjusting the clamps using the wrench supplied with the limit. Make
sure the material is completely secured to the tray and in contact with the base of the tray.
To release the pipe, loosen the clamps using the wrench until the tray comes loose.
5.3. Installing the Through Pipe
If you use a pipe that is longer than 3000 mm, use the central opening on the securing tray so the material
goes through it.
To install the through pipe, unscrew the two securing screws from the plate on the back of the securing
tray
.