nardi SUNSTORM SFH1200, Руководство по эксплуатации и обслуживанию

Страница: 12 / 64

14
·
Always move AWAY the children from the working area of the SUNFLOWER HEADER.
·
Do not TRY to pull or push the product in different parts of the SUNFLOWER HEADER by hand if the machine is
running or the engine is running.
·
In the event of flooding, before working on the machine to extract or remove the product with his hands, follow this
instructions:
1. Lower the header to the ground.
2. Stop the engine of the combine, remove the key from the dashboard and wait for the complete SUNFLOWER
HEADER stop.
·
After each maintenance operation, restore the covers removed before use of the machine.
01.03.3 Ecological considerations
Earth, air and water are the essential elements for life and should be respected.
In cases where the legislation does not regulate the use and disposal of products needed for current technology, follow
all suitable precautions to avoid even mild pollution.
Here are some recommendations that may be helpful:
·
Find out about the laws in force in the country in which you operate about and respect them.
·
If there are no regulations, ask the dealers on the effects of oil lubricants, detergents, etc... have on people and the
environment, also ask the mode to conserve, use and properly dispose of these products. In most cases, the
agricultural advisers will be able to respond appropriately to your questions.
01.04 Scrapping and waste disposal
When you consider appropriate to scrap your header, you must follow the following general rules:
·
Dismantle the machine into its constituent parts. Pay attention to all the operations that involve higher risks such as
disassembly of mechanical parts under tension such springs, torsion shafts, leaf springs, etc.., for which one must
follow procedures necessary to safeguard the health and safety of persons and the integrity of the environment.
·
To scrap must respect the regulations in force without losing anything in the environment.
Any irregularity committed by the Customer or final User during and after the scrapping and disposal of the
machine components, interpreting and applying the regulations in force, is the sole responsibility of the same.
01.05 Copyright
The copyright of this manual for use and maintenance is owned by Pegaso Srl.
This manual for use and maintenance is intended to serve as a guide and contains, in addition to technical description of
the machine, all the information (instructions, technical diagrams, drawings, photo) useful to transportation, installation,
assembly / disassembly, the commissioning, the management, maintenance and cleaning, the scrapping of your
header cannot be totally or partially copied and / or distributed to persons not authorized for competitive purposes, or
disclosed to any other party.
UK