3-2
PMM SET ADDRESS Instructions for use
3.3 Hardware installation
The PMM SB-10 Switching Control Box works in conjunction with various
device in a wide range of frequencies and levels.
The examples in the Chapter 2 show the connection of PMM SB10 with
Personal Computer, PMM OR03 Programmable Optical Repeater and its
probes, and PMM EP600/601/602/603.
PMM SB10 allows the user to take field measurements with up to 10
device, connected at the same time, placed at different measuring locations
and/or working on different frequencies, and full scale ranges by using a
single RS232 port to the PC.
After having completed the setup, run the PMM SET ADDRESS Utility.
3.4 To run the program
To run the utility double click on the
Setadd53.exe
icon
3.5 To start the program
In case the PMM SB10 or PMM OR03 are OFF or they are not connected
properly or the serial port is wrong or the communication is not correct an
error message window will be displayed:
Once the connection is established
,
the main window will be displayed:
