General Information
1-1
1 - General Information
1.1 Documentation
Enclosed with this manual are:
•
a service questionnaire to send back to NARDA in case of equipment
service is needed
•
an accessories check list to verify all accessories enclosed in the
packaging.
1.2 Introduction to
PMM SB-10
The PMM SB-10 Switch Control Box is a versatile and expandable
accessory for the electric and magnetic fields and electrosmog
measurement devices family.
Either the OR-03 Optical Repeater with all their field probes and the EP60X
series are supported. The EHP-50, EHP-50A, EPH-50B, EHP-50C, EHP-
50D and EHP-50E are not supported.
One PMM SB-10 allows to take field measurement with up to 10 measuring
devices connected at the same time, either placed in different measuring
points and/or working on different frequency and full scale ranges. it is
possible to have a chain up to five SB-10 to connect up to 50 remote
devices.
The PMM SB-10 is powered by an External DC supply or by a PC with
apposite USB A or B type cable. With the USB is possible to supply only up
to three SB-10 (30 remote devices).
One PMM SB-10 allows to connect up to ten devices via optical fiber to the
Personal Computer by a single RS232 interface connection. Besides, using
one free USB port, you can connect another SB-10 with low consumption.
1.3 Standard accessories
The standard accessories included with PMM SB-10 are:
•
External DC supply (DC 12 V, 1.25 A)
•
USB cable, type A-B (1.8 m long);
•
RS232 serial cable with 9/25 pin adapter (2 m long);
•
SB-10 to SB-10 Expansion cable (20 cm long);
•
Optical connectors protection caps (20 pcs)
•
Operating Manual;
•
Certificate of Compliance;
•
Return for Repair Form.
Document SB10EN-30406-1.00
-
© NARDA 2013
