NARDA PMM SB-10, Руководство пользователя

Страница: 18 / 20

3-4 PMM SET ADDRESS Instructions for use
Once the connection is established, the utility starts to check and calibrate
each axis:
At the end of the process, the software shows the Release and Date of the
device connected to the SB-10.
The default address of each device is 00 and the utility will show the
message “ADDRESS received 00”.
To change the address of the device, enter a new address (for example 05)
and click WRITE.
The utility shows the message “ADDRESS received 05”
Press EXIT to close the utility.