NARDA PMM L3-32, Руководство пользователя

Страница: 41 / 46

Accessories 8-3
Housing
The PMM SBRF4 is built in a metallic housing; on the front side are located
the 50
Ω Loaded switch, the band Switch, the manual switch for Line/Axis
and LEDs; on the right side the Remote control and the RF output for EMI
Receivers; on the left side the RF input for lines/axis under test.
Front view
Fig. 8-2 Front view
A – Selectable open or 50
Ω
termination unselected
inputs
B - Filter 150kHz-108MHz
C - Manual switch for phase/axis under test (with
PMM receivers the switch is disabled and the
switching is automatic)
D – LED showing the line under test
Right view
Fig. 8-3 Right view
E - Remote control connector for PMM 9010F or PMM 9010/30P
F – RF output to EMI Receiver
Left view
Fig. 8-4 Left view
G – RF input for lines/axis under test