NARDA PMM ER9000, Руководство пользователя

Страница: 72 / 106

7-6 Remote control
?DET
This query command
#?DET*
sends back a string reporting the six detector for
manual mode. Unit is fixed dBµV. Each value is separated by a semicolon. The
order is Peak; Qpeak; RMS;AVG;C-RMS:C-AVG
In case Qpeak is not available (RBW other than 9kHz [only for Band B] ,120kHz)
Qpeak field is replaced by the string “----“.
In case C-RMS or C-AVG is not available (RBW other than 9kHz,120kHz)
respective field is replaced by the string “----“.
An additional string “OVER;” is appended at the end whenever an over range
condition occurred
Example of reply
: DET=23.22;17.09;16.23;11.36,16.01,15.50;
(which means Peak= 23.22 ; Qpeak= 17.09 ; RMS= 16.23 ;AVG= 11.36 ;C-
RMS= 16.01; C-Avg =15.50
Example of reply (No Cispr filter selected, over range shown) :
DET=17.20;-----;11.98;9.57;-----;-----;OVER;
?DMD This query command #?DMD * sends back a string expressing the status of
demodulator. The reply is either:
•
DMD=Off (The Demodulator is OFF)
•
DMD =AM (The Demodulator is On and demodulating AM )
•
DMD =FM (The Demodulator is On and demodulating FM )
?DMV This query command #?DMV * sends back a string expressing the volume of
demodulator. The reply is made of the string “ DMV=” followed by the magnitude of
volume ranging from 0 to 100.
Example of reply:
DMV=50 (The Demodulator Volume is 50)
?FPGA This query command #?FPGA* sends back a string containing information about
version of FPGA.
Example of reply:
FPGA=0x14
?HIS This query command #?HIS * sends back a string expressing the status of the high
sensitivity mode.
When the ER ER receiver in 7.5 MHz High Sensitivity mode (1), or in 15 MHz Fast
mode (0).
The reply is either:
•
HIS=0 The Fast mode is enabled (15 MHz)
•
HIS=1 The High Sensitivity mode is enabled (7.5 MHz)
?IDN This query command #?IDN* sends back a string containing information about
model, release and date of firmware.
Note that the two bytes <CR><LF> are appended to the string before the
terminator.
Example of reply:
IDN=ER9000-FW – Opt.1 – 0.52 21/21 <CR><LF>