NARDA PMM ER9000, Руководство пользователя

Страница: 54 / 106

5-2 Updating Firmware
The User must have administrator privileges to install the
ER8000SeriesUp software in Windows; right click on the program .exe
file and click on “Run as administrator” to temporarily run the
program or application as an administrator until close it (Windows
also allows to mark an application so that it always runs with
administrator rights).
Once the
ER8000SeriesUp Setup has been installed in the PC, another
item is created in the Programs list at Start Menu, which is “ PMM Emission
Suite ”, from where the “ ER8000SeriesUp ” program must be run from.
Click on “ ER8000SeriesUp” (ER8000SeriesUp.exe) once for running the
update program, so getting the following window:
Two firmware components can be updated by this application: Firmware,
which is the receiver internal program, and FPGA, to update the internal
programmable logic.
The
ER8000FW.ldr file required for Firmware updating and the
mainER8000.bin file for FPGA are automatically stored in the same directory
of the ER8000SeriesUp.exe , otherwise just copy them there before
performing the upgrade.