NARDA FieldMan, Руководство пользователя

Страница: 110 / 126

11 PC software and updates
110
FieldMan Narda
11.1 Narda-TSX PC software
The newly developed, extremely powerful Narda-TSX PC software is available for evalu-
ating and documenting the measurement results, media and other information. It is
Narda's new software platform that will support other Narda products in the future in addi-
tion to FieldMan. The PC software is also required for firmware updating and enables
remote control of the FieldMan.
For connection to a PC, the FieldMan has the following interfaces:
• Serial COM interface via the USB-C port
• Network interface via the Ethernet port
• Serial COM interface via the optical port
11.1.1 Establishing a USB connection
11.1.2 Establishing a network connection
The device comes with a USB cable that can be used for power supply and connection
to a PC.
Establish a USB connection:
1.
Under
GENERAL SETTINGS
>
CONNECTIVITY
>
SERIAL INTERFACE
, activate
the
USB
function.
2.
Connect the device at the USB-C port (see
Fig. 2: 6
) to a USB port on the PC using
the supplied USB cable.
↳
The first time you connect, the FieldMan is automatically set up on the PC.
↳
After setup, the FieldMan can be used.
⇒
Instructions for further use of the device can be found in the online help for the Narda-
TSX PC software.
An Ethernet cable with RJ45 connector is required to establish a network connection.
Establishing a network connection:
1.
Under
GENERAL SETTINGS
>
CONNECTIVITY
>
ETHERNET
, activate the
Ethernet
function. Select the appropriate network settings and activate
DHCP
or
enter the address settings manually.
2.
Connect the device using a suitable Ethernet cable at the Ethernet port (see
Fig. 2: 9
)
to a router or network hub.
3.
Instructions for further use of the device can be found in the online help for the Narda-
TSX PC software.