EN
W415-2184 / 06.07.19
41
finishing
SAFETY
BARRIER
A.
Remove the safety barrier and glass door (see "safety barrier & glass door" section).
B.
Install the side brackets, ensure the front face is on a soft surface to avoid any damages during bracket
installation
(Fig. 1)
.
C.
Install the lower side bracket on the front
(Fig. 2)
.
D.
Install the safety barrier, spline up
(Fig. 3)
.
E.
Install the 4 screws with spacers into the sides of the firebox
(Fig. 4).
F.
Place the front facing onto the appliance by hooking the its brackets over the screws and spacers
(Fig. 5)
.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
BARRIE
R
SAFET
Y
9.2 contemporary front face kit installation
X4
Fig. 5
