Power
Turns the appliance on/off.
Ember Bed Light
Controls ember bed light settings.
Settings:
L0 - Ember bed light off
L1 - White
L2 - Blue
L3 - Green
L4 - Red
L5 - Yellow
L6 - Purple
L7 - Auto-cycle through white, blue, green, red,
yellow, and purple.
(NOTE: It will take 8.5 seconds
to switch between colours.)
L8 - Lock to desired color
Flame Control
Controls flame.
8 Settings:
00 - Flame off
01 - Orange flame
02 - Yellow flame
03 - Blue flame
04 - Yellow / orange flame
05 - Orange / blue flame
06 - Yellow / blue flame
07 - Yellow / orange / blue flame
F° / C° Switch
Changes temperature format from Fahrenheit to Cel-
cius or vice versa. Press and hold the Flame button
for 5 seconds.
Heater Control
Turns the heater and blower on/off.
4 Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Low heat
H2 - High heat
Heater Lock
Heater button can be locked or unlocked by holding
the Heater button for 5 seconds.
EN
W415-3031 / 04.30.21
19
5.0 operating instructions
Once the appliance has been plugged into a grounded electrical outlet or hard wired to a dedicated 220V-240V
power supply, it is ready to operate.
The Control Panel is located on the right side of the appliance (when viewed from the front).
5.1 operating control panel
• Ensure the house circuit breakers for the power supply are turned on. When initially connecting the appliance to
a power source, the appliance will perform an LED check. The appliance will flash on and off for 5 seconds.
!
WARNING
Содержание Allure NEFVC32H-EU
Страница 29: ...EN W415 3031 04 30 21 29 notes 29 1...