NAPCO GEM-ACM1D Скачать руководство пользователя страница 24

24 

NAPCO SECURITY SYSTEMS, INC.  (NAPCO) 

warrants its products to be free from manufacturing 
defects in materials and workmanship for thirty-six 
months following the date of manufacture.  NAPCO will, 
within said period, at its option, repair or replace any 
product failing to operate correctly without charge to the 
original purchaser or user. 

 
This warranty shall not apply to any equipment, or 

any part thereof, which has been repaired by others, 
improperly installed, improperly used, abused, altered, 
damaged, subjected to acts of God, or on which any 
serial numbers have been altered, defaced or removed.  
Seller will not be responsible for any dismantling or 
reinstallation charges. 

 
THERE ARE NO WARRANTIES, EXPRESS OR 

IMPLIED, WHICH EXTEND BEYOND THE 
DESCRIPTION ON THE FACE HEREOF.  THERE IS 
NO EXPRESS OR IMPLIED WARRANTY OF 
MERCHANTABILITY OR A WARRANTY OF FITNESS 
FOR A PARTICULAR PURPOSE.  ADDITIONALLY, 
THIS WARRANTY IS IN LIEU OF ALL OTHER 
OBLIGATIONS OR LIABILITIES ON THE PART OF 
NAPCO. 

 
Any action for breach of warranty, including but not 

limited to any implied warranty of merchantability, must 
be brought within the six months following the end of the 
warranty period.   

 
IN NO CASE SHALL NAPCO BE LIABLE TO 

ANYONE FOR ANY CONSEQUENTIAL OR 
INCIDENTAL DAMAGES FOR BREACH OF THIS OR 
ANY OTHER WARRANTY, EXPRESS OR IMPLIED, 
EVEN IF THE LOSS OR DAMAGE IS CAUSED BY 
THE SELLER'S OWN NEGLIGENCE OR FAULT. 

 
In case of defect, contact the security professional 

who installed and maintains your security system.  In 
order to exercise the warranty, the product must be 
returned by the security professional, shipping costs 
prepaid and insured to NAPCO.  After repair or 
replacement, NAPCO assumes the cost of returning 
products under warranty.  NAPCO shall have no 
obligation under this warranty, or otherwise, if the 
product has been repaired by others, improperly 
installed, improperly used, abused, altered, damaged, 
subjected to accident, nuisance, flood, fire or acts of 
God, or on which any serial numbers have been altered, 
defaced or removed.  NAPCO will not be responsible for 
any dismantling, reassembly or reinstallation charges. 

 
This warranty contains the entire warranty.  It is the 

sole warranty and any prior agreements or 
representations, whether oral or written, are either 
merged herein or are expressly canceled.  NAPCO 

neither assumes, nor authorizes any other person 
purporting to act on its behalf to modify, to change, or to 
assume for it, any other warranty or liability concerning 
its products. 

 
In no event shall NAPCO be liable for an amount in 

excess of NAPCO's original selling price of the product, 
for any loss or damage, whether direct, indirect, 
incidental, consequential, or otherwise arising out of any 
failure of the product.  Seller's warranty, as hereinabove 
set forth, shall not be enlarged, diminished or affected by 
and no obligation or liability shall arise or grow out of 
Seller's rendering of technical advice or service in 
connection with Buyer's order of the goods furnished 
hereunder. 

 
NAPCO RECOMMENDS THAT THE ENTIRE 

SYSTEM BE COMPLETELY TESTED WEEKLY. 

 

Warning:

  Despite frequent testing, and due to, but 

not limited to, any or all of the following: criminal 
tampering, electrical or communications disruption, it is 
possible for the system to fail to perform as expected.  
NAPCO does not represent that the product/system may 
not be compromised or circumvented; or that the product 
or system will prevent any personal injury or property 
loss by burglary, robbery, fire or otherwise; nor that the 
product or system will in all cases provide adequate 
warning or protection.  A properly installed and 
maintained alarm may only reduce risk of burglary, 
robbery, fire or otherwise but it is not insurance or a 
guarantee that these events will not occur. 

 

CONSEQUENTLY, SELLER SHALL HAVE NO 
LIABILITY FOR ANY PERSONAL INJURY, PROPERTY 
DAMAGE, OR OTHER LOSS BASED ON A CLAIM 
THE PRODUCT FAILED TO GIVE WARNING. 

 

Therefore, the installer should in turn advise the 
consumer to take any and all precautions for his or her 
safety including, but not limited to, fleeing the premises 
and calling police or fire department, in order to mitigate 
the possibilities of harm and/or damage. 

 
NAPCO is not an insurer of either the property or 

safety of the user's family or employees, and limits its 
liability for any loss or damage including incidental or 
consequential damages to NAPCO's original selling 
price of the product regardless of the cause of such loss 
or damage. 

 
Some states do not allow limitations on how long an 

implied warranty lasts or do not allow the exclusion or 
limitation of incidental or consequential damages, or 
differentiate in their treatment of limitations of liability for 
ordinary or gross negligence, so the above limitations or 
exclusions may not apply to you.  This Warranty gives 
you specific legal rights and you may also have other 
rights which vary from state to state. 

NAPCO LIMITED WARRANTY 

Содержание GEM-ACM1D

























Отзывы: