Technisches Handbuch
SMCI12
Connection and commissioning
10
Issue: V 1.0
Step Action
Note
8
In the "Port" field, select the COM port to which
the SMCI12 is connected.
The number of the COM
port to which the controller
is connected can be found
in the device manager of
your Windows PC (System
Control/System/Hardware).
9
Select the "115200 bps" entry in the "Baudrate"
selection field.
10
Check the current setting using the motor data
sheet.
Under no circumstances
may the current be set to a
value higher than the rated
current of the motor.
11
Select the <Movement Mode> tab.
12
Click on the <Test Record> button to carry out
the pre-set travel profile.
The connected motor
operates with the pre-set
travel profile (default travel
profile after new
installation).
13
You can now enter your required settings.
For instance, you can enter a new travel profile.
See the NanoPro separate
manual.
