Technical
Manual
PD4-N5918
About this manual
Issue: V 1.4
3
About this manual
Target group
This technical manual is aimed at designers and developers who need to operate a
Nanotec
®
stepper motor without much experience in stepper motor technology.
Important information
This technical manual must be carefully read before installation and commissioning of
the Plug & Drive motor.
Nanotec
®
reserves the right to make technical alterations and further develop
hardware and software in the interests of its customers to improve the function of this
product without prior notice.
This manual was created with due care. It is exclusively intended as a technical
description of the product and as commissioning instructions. The warranty is
exclusively for repair or replacement of defective equipment, according to our general
terms and conditions; liability for subsequent damage or errors is excluded. Applicable
standards and regulations must be complied with during installation of the device.
For criticisms, proposals and suggestions for improvement, please contact the above
address or send an email to: [email protected]
Additional manuals
Please also note the following manuals from Nanotec:
NanoPro
User Manual
Configuration of controllers with the
NanoPro software
NanoCAN User Manual
Configuration of the CAN
communication for CANopen-
capable controllers with the
NanoCAN software
Nanotec CANopen
reference
Detailed documentation of the
CANopen functions
Programming manual
Controller programming
•
Command
reference
•
NanoJ
•
COM
interface
The manuals are available for download at www.nanotec.com.
