Technical Manual
PD4-N5918
Connections and circuits
14
Issue: V 1.4
3
Connections and circuits
3.1 Inputs and outputs (JST PHD-12)
Introduction
An overview of the assignments can be found in the connection diagram in Section
2.2. This section looks in detail at the assignment, functions and circuits of the
connections.
Pin assignment
Pin no.
Name
Wire color ZK-PD4N
1
Signal GND (Com)
GY/BN
2 GND
RD
3 Input
1
BK
4 Input
2
VT
5 Input
3
GY/PK
6 Input
4
RD/BU
7 Input
5
WH/GN
8 Input
6
BN/GN
9 Analog
input
WH/BU
10 Output
1
WH/YE
11 Output
2
YE/BN
12 Output
3
WH/GY
Input circuits
All inputs (apart from the "Analog In" input) are electrically isolated by optocouplers
from the voltage supply of the PD4-N and designed for 5-24 V input signals at an input
current of 8 mA.
Note:
The voltage must not exceed 24 V. It should drop below 2 V for safe switching off and
be at least 4.5 V for safe switching on.
