720007-0010R
May 2017
iii
High Speed Video Thermal Printer
Owner’s Manual
Information to the User
This equipment must be installed and used in strict accordance with the manufacturer's
instructions. However, there is no guarantee that interference to radio communications
will not occur in a particular commercial installation. If this equipment does cause
interference, which can be determined by turning the equipment off and on, the user is
encouraged to contact Nanoptix Inc. immediately.
Nanoptix Inc. is not responsible for any radio or television interference caused by
unauthorized modification of this equipment or the substitution or attachment of
connecting cables and equipment other than those specified by Nanoptix Inc. The
correction of interferences caused by such unauthorized modification, substitution or
attachment will be the responsibility of the user.
In order to ensure compliance with the Product Safety, ICES, FCC and CE marking
requirements, you must use the power supply, power cord, and interface cable which
were shipped with this product or which meet the following parameters:
Power Supply
UL Listed power supply with standard 60Hz-50Hz, 100-240VAC input and 24VDC
output equipped with AC line filtering, over-current and short-circuit protection.
Use of this product with a power supply other than the Nanoptix Inc. power supply will
require you to test the power supply and Nanoptix Inc. printer for FCC and CE mark
certification.
Communication Interface Cable
An approved Nanoptix interface cable must be used with this product. Using a cable
other than Nanoptix approved product will require that you test the cable with the
Nanoptix Inc. printer and your system for FCC and CE mark certification.
Power Cord
A UL listed, detachable power cord must be used. A power cord with Type SVT
marking must be used. For applications outside the North America, power cords that
meet the particular country’s certification and application requirements should be used.
Use of a power cord other than described here may result in a violation of safety
certifications that is in force in the country of use.
Industry Canada (IC)
Radio Frequency Interference Statement
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
