2
Installation
1. Open the box and remove the
materlal foam
in the box.
2. Carefully lift the instrument out of the box, holding it by handholds
in the
bottom of the base.
3. Place the instrument on a flat, level surface (table or incubator).
4. Unscrew the
filter change lock module screw
until they spin freely.
5. Gently pull filter change lock module screw out, away from the
instrument. Put the filter in the pouch to keep.
6. Connect the PC and the Control box (Serial port, Camera port)
using two
USB cables
. (PC Monitor Resolution : 1920 X 1080 pixels)
7. Connect the
JuLI™ Stage instrument
and the
Control box
and
using the connection cable.
☞
Note : Make sure for connection port direction of control box before
connecting.
8. Plug the power cord of PC and instrument into the electrical outlet.
9. Turn the PC and the Control box on by pressing the
Power button
.
10. Double-click the JuLI™ Stage icon on desktop The JuLI™ Stage
software starts up.
Power port
USB port
Filter change lock module
Filter change lock module
Содержание JuLi Stage
Страница 10: ...10 Memo...
Страница 11: ...JuLI Stage New paradigm for cell based assay 11 Memo...